Index Search; Repeat Playback; Soundtrack Selection; Skip Search - JVC HR-272EU Instructions Manual

Index Search

Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
Activate Index Search.
w e 2 6
Press or ( or
displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press
until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
twice.
To locate the beginning of D from the current position, press
once.
Current position
When the specified index code is located, playback begins
automatically.

Skip Search

During playback, press 30 SEC 1 to 4 times to skip over
unwanted sections. To resume normal playback, press
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.

Next Function Memory

The Next Function Memory "tells" the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a- For Automatic Start Of Playback
3
Press , then press
b- For Automatic Power Off
3
Press , then press
c- For Automatic Timer Standby
3
Press , then press
2 6
). " 1" or " 1" is
w e
or repeatedly
Index number
4
within 2 seconds.
1
within 2 seconds.
#
(TIMER) within 2 seconds.

Repeat Playback

Your recorder can automatically play back the whole tape 100
times repeatedly.
1
Start playback.
4
Press .
2
Activate Repeat Playback.
4
Press and hold for over 5 seconds, then release.
The Play indicator (
slowly.
After playing back a tape 100 times, the recorder stops
automatically.
3
Stop Repeat Playback.
8
Press at any time.
4 3
Pressing ,
w

Soundtrack Selection

e
(HR-J670/671/672/673/
674EU only)
Your video recorder is capable of recording three soundtracks
(HI-FI L, HI-FI R and NORM) and will play back the one you
select.
During Playback
Pressing AUDIO on the remote control changes the soundtrack
as follows:
TRACK
On-Screen Display
HI FI
j h
L R
4
.
HI FI
j
L
HI FI
h
R
NORM
HI FI
NORM
NOTES:
j h
"HIFI L R" should normally be selected. In this mode, Hi-
Fi stereo tapes are played back in stereo, and the normal audio
track is played back automatically for tapes with only normal
audio.
For instructions on recording stereo and bilingual
programmes, refer to page 22.
"O.S.D." must be set to "ON" or the on-screen displays will
not appear ( pg. 37).
u
) on the front display panel blinks
5 9
, or also stops Repeat Playback.
USE
For Hi-Fi stereo tapes
For main audio of Bilingual tapes
For sub audio of Bilingual tapes
For audio-dubbed tapes
For audio-dubbed tapes
19
EN