JVC HR-272EU Instructions Manual page 9

C
Select the language.
Press OK. The Language Set display appears on the front
display panel and/or on the TV screen.
On the front display panel
rt
Press to select your language code.
Language Code
ENGLISH : 01
DEUTSCH : 02
FRANCAIS : 03
ITALIANO : 04
CASTELLANO : 05
NEDERLANDS : 06
SVENSKA : 07
(Example) DEUTSCH is selected for SUISSE.
International telephone
country code
On the on-screen display
rt
Press to move the
highlight bar (pointer) to the
language of your choice.
D
Perform Auto Set Up.
Press OK. The AUTO SET/T-V LINK display appears on
the front display panel and/or on the TV screen.
On the front display panel
rt
Press to select "Auto" and press OK or
On the on-screen display
rt
Press to move the
highlight bar (pointer) to
"AUTO SET" and press OK or
e
.
"Auto" blinks on the front display panel; do NOT press
any button on the recorder or remote control until the
front display panel shows clock time, "(CH) 1" or
" " as illustrated on page 11.
– –:– –
NORSK : 08
SUOMI : 09
DANSK : 10
POLSKI : 11
CEcTINA
: 12
MAGYAR : 13
Language code
e
.
If you are using the on-screen
display, the AUTO SET
screen will appear. As Auto
q
Set Up progresses, the "
mark on the TV screen
moves from left to right.
If you have connected the recorder to your TV via the AV
connection ( pg. 7), the recorder will automatically perform
Preset Download ( pg. 10).
ATTENTION
Once you have performed Auto Set Up, even if the recorder's
memory backup has expired, all the stored stations and their
Guide Program numbers remain in the recorder's memory
and the recorder will not perform Auto Set Up again. You
only need to set the clock. (
If you have moved to a different area, perform each setting as
required.
Video channel setting (for RF connection users)
Tuner setting pg. 40
Clock setting pg. 48
If a new station starts broadcasting in your area, perform
tuner setting ( pg. 40) and, if necessary, video channel
setting ( pg. 46).
NOTES:
In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the recorder can perform neither
Auto Clock Set nor Auto Guide Program Number Set.
If there is a power cut, or if you press
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step 1.
Auto Clock Set may not function properly depending on the
reception condition.
If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels
( pg. 43, "INFORMATION").
"
Beginning
pg. 48)
1
or MENU while Auto
9
EN
End
pg. 46