JVC HR - S7950EU Instructions Manual page 7

ON-SCREEN DISPLAY
When "O.S.D." is set to "ON" (
A Operation Mode Indicators
B Tape Speed SP/LP/EP
C Tape Direction
D Index MARK Indicator
E Counter Display
F Tape Remaining Time Indicator
G Audio Mode Display
H Tape Position Indicator
The tape position indicator
appears on the TV screen
when you press or
3
from the Stop mode
5
or perform an Index Search
( pg. 22). The position of
" " in relation to "0"
q
(beginning) or "+" (end)
shows you where you are
on the tape.
NOTE:
Depending on the type of tape being used, the tape position
indicator may not appear correctly.
pg. 49), various operational indicators appear on the TV screen.
pg. 24
pg. 25
pg. 23
Beginning
I VPS/PDC Indicator
J Type of Broadcast
K Current Day/Month/Year
L Clock Display
M Channel Position Number and Station Name/
Auxiliary Input Indicator (L-1, L-2, F-1, S-1 or
SAT*)
* When "L-2 SELECT" is set to "SAT" (
instead of "L-2".
N Timer Warning Display
A warning appears on the TV screen to tell you that the
timer-recording is to start in 5 minutes if you're not in the
Timer mode at that time. The warning blinks for the entire 5
minutes leading up to the start of timer recording. To clear
the display, press
S-VHS ET Indicator
(S-VHS ET : ON/S-VHS ET : OFF)
O "Cassette Loaded" Mark
End
pg. 29, 31
pg. 26
pg. 43), "SAT" appears
on the remote control.
&
7
EN
pg. 26, 51