Recording Features - JVC HR - S7950EU Instructions Manual

Jvc video cassette recorder instructions
Table of Contents

Advertisement

Recording Features

Record One Programme While
Watching Another
If your recorder is connected to the TV via the AV
connection, press TV/VCR. The recorder's VCR indicator
and the TV broadcast being recorded disappear. Once
recording is in progress, all you need to do is to set the
channel controls on the TV for the station you wish to
view.
The programme selected with the TV's channel controls
appears on the TV screen, while the one selected with the
recorder's PR buttons is recorded on the tape.
If a decoder is connected to the recorder (
select a scrambled channel as well with the TV channel
controls.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
1
Start recording.
Press
2
Engage the ITR mode.
Press
front display panel.
3
Set the recording duration.
If you want to record for more than 30 minutes, press
to extend the time. Each press extends recording time by
30 minutes.
NOTE:
You can only perform ITR using the
front panel.
Elapsed Recording Time Indication
1
Set the counter display.
Press – –:– – until a counter reading appears on the front
display panel.
The front display panel shows
the counter reading with ":"
lit.
2
Reset the counter.
Press 0000 before starting recording or playback.
The counter is reset to "0:00:00" and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining Time
Press – –:– – until the time remaining on the tape appears.
The front display panel shows
the tape remaining time with
":" blinking.
By pressing the – –:– – button,
you can change display to
show the channel position*, clock time, counter reading or
tape remaining time.
* Channel position is not displayed during playback.
NOTE:
Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
"– –:– –" may sometimes appear, or the display may blink on
occasion.
pg. 46), you can
7
on the recorder.
7
again. " " blinks and "0:30" appears on the
25
EN
7
7
button on the recorder's

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-s7950eu

Table of Contents