Introduction - Thermador PROFESSIONAL PH30HS Use And Care Manual

Introduction

Before using your appliance, be sure to read this manual.
Pay special attention to the Important Safety Instructions
located at the beginning of the manual.
This manual provides the proper care and use instructions
for two styles of THERMADOR PROFESSIONAL
Series Wall Hoods:
• 27" Pro Wall Hood models (PHxxGS), 27" (686mm) in
depth, with widths of 36" (914mm), 42" (1067mm), 48"
(1219mm), and 54" (1372mm). This model series
features brushed stainless-steel canopy with halogen
lamps and heat lamps (see Figure 1).
• 24" Pro Wall Hood models (PHxxHS), 24" (610mm) in
depth, with widths of 30" (762mm), 36" (914mm), and
48" (1219mm). This model series features brushed
stainless-steel canopy with halogen lamps (see
Figure 1).
All hoods require the choice of a Remote, Inline, or Integral
Blower. Use only THERMADOR
®
THERMADOR ventilation hoods. All blower models are
sold separately. See Table 1, Blower & Circuit Breaker
Ratings for recommended blowers. Contact Customer
Service for additional options.
B
LOWER
R B 600 CFM
EMOTE LOWER
R B 1000 CFM
EMOTE LOWER
R B 1300 CFM
EMOTE LOWER
I B 600 CFM
NLINE LOWER
I B 1000 CFM
NLINE LOWER
I B 600 CFM
NTEGRAL LOWER
I B 1000 CFM
NTEGRAL LOWER
* 20 Amp circuit breaker required when using the VTR1330E Remote Blower with a 27" Pro Wall Hood.
** 15 Amp circuit breaker required when using the VTR1330E Remote Blower with a 24" Pro Wall Hood.
When connected to a GFCI-protected supply, the Pro Hoods are suitable for use in damp locations that are protected from
outside weather conditions and not subject to saturation with water and other liquids, but can be subject to moderate
degrees of moisture. Refer to local codes, NEC/CEC, and or the Authority Having Jurisdiction (AHJ) for additional
information.
®
PH
®
blowers with
SKU
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
VTN630C
VTN1030C
All Hood models are rated for 120 VAC, using a 15 amp or
20 amp circuit breaker; see Installation Manual for more
details.
30", 36", 42", 48", 54"
(762, 914, 1067, 129, 1372mm)
24", 27"
(61mm, 686mm)
Figure 1: Pro 24" & 27" Wall Hoods
V
OLTAGE
CFM
(AC)
600 120
1000 120
1300 120
600 120
1000 120
600 120
1000 120
Table 1: Blower & Circuit Breaker Ratings
B C
LOWER IRCUIT
C B
URRENT REAKER
(AMPS) (AMPS)
4.2 15
5.7 15
8.5 20* / 15**
4.2 15
5.7 15
2.7 15
5.4 15
English 1