Introduction - Thermador PROFESSIONAL PH30HS Use And Care Manual

Introduction

Before using your appliance, be sure to read this manual.
Pay special attention to the Important Safety Instructions
located at the beginning of the manual.
This manual provides the proper care and use instructions
for two styles of THERMADOR PROFESSIONAL
Series wall hoods:
• PHxxGS — 27" (686 mm) in depth, with widths of 36"
(914 mm), 42" (1067 mm), 48" (1219 mm), and 54"
(1372 mm). This model series features brushed
stainless-steel canopy with halogen lamps and heat
lamps.
• PHxxHS — 24" (610 mm) in depth, with widths of 30"
(762 mm), 36" (914 mm), and 48" (1219 mm). This
model series features brushed stainless-steel canopy
with halogen lamps.
Blower
Remote Blower 600 CFM
Remote Blower 1000 CFM
Remote Blower 1300 CFM
Inline Blower 600 CFM
Inline Blower 1000 CFM
Integral Blower 600 CFM
Integral Blower 1000 CFM
* 20 Amp circuit breaker required when using the VTR1330E Remote Blower with a 27" Pro Wall Hood.
** 15 Amp circuit breaker required when using the VTR1330E Remote Blower with a 24" Pro Wall Hood.
®
PH
SKU CFM
VTR630D 600
VTR1030D 1000
VTR1330E 1300
VTI610D 600
VTI1010D 1000
VTN630C 600
VTN1030C 1000
All hoods require the choice of a Remote, Inline, or Integral
Blower. Use only THERMADOR
THERMADOR ventilation hoods. All blower models are
sold separately. See Table 1, Blower & Circuit Breaker
Ratings for recommended blowers. Contact Customer
Service for additional options.
All Hood models are rated for 120 VAC, using a 15 amp or
20 amp circuit breaker; see the Installation Manual for more
details.
When connected to a GFCI-protected supply, the Pro
Hoods are suitable for use in damp locations that are
protected from outside weather conditions and not subject
to saturation with water and other liquids, but can be
subject to moderate degrees of moisture. Refer to local
codes, NEC/CEC, and or the Authority Having Jurisdiction
(AHJ) for additional information.
Blower Current
Voltage (AC)
120 4.2
120 5.7
120 8.5
120 4.2
120 5.7
120 2.7
120 5.4
Table 1: Blower & Circuit Breaker Ratings
®
blowers with
Circuit Breaker
(AMPS) (AMPS)
15
15
20* / 15**
15
15
15
15
English 1