Phonebook - Cisco E20 Administrator's Manual

Cisco IP Video Phone E20
Contents Introduction
Manual: The system will always use the static defined NTP server
address specified by the user.
SSH
Enables login via SSH.

Phonebook

Server 1
ID: Enter a name for the external phonebook. Addresses the specific
phonebook.
Type: Can be TMS (TANDBERG Management System) or VCS (Video
Communication Server)
URL: Enter the address (URL) to the external phonebook server.
Addresses the specific phonebook server.
Provisioning
Provides the possibility of managing the E20 by using an external manager/
management system.
External Manager
Address: Enter the name for the provisioning server.
Protocol: http or https
Path: Enter the path within the external manager to access the
provisioning information (if http-based provisioning.)
Domain: Enter the domain of the provisioning server
Mode
Off: The system will not try to register to any management system.
TMS: If set to TMS the system will try to register with a TMS server as
described in the address and path settings. TMS is short for TANDBERG
Management System. Please contact your TANDBERG representative
for more information.
VCS: If set to VCS the system will try to register with a VCS as described
in described in the address and path settings. VCS is short for Video
Communication Server. Please contact your Cisco representative for
more information.
D14330.12 Administrator guide Cisco IP Video Phone E20, TE4.1 November 2011.
All contents are Copyright © 2010–2011, Cisco Systems, Inc. All rights reserved.
Deploying E20 Using E20
28
The settings Advanced settings Advanced settings
HTTP: If set, the E20 will try to download configuration from a web
server. The URL is the concatenation of the External Manager address
and the Path parameter. If the protocol is https, the E20 will use HTTPS
during the download. If the HttpMethod parameter is POST, the E20 will
do an HTTP post to the web server. Otherwise, it will do a HTTP Get to
the web server. LoginName and password will be used if the web server
requires username and password to download the configuration.
Callway: To use with Callway contact your Cisco representative for
more information.
CUCM: The E20 will try to connect to a Cisco Unified Communications
Manager. This requires that CUCM are version 8.5 or above and that the
CUCM is aware of the E20.
Auto: If set, the E20 will enter auto provisioning mode and look for both
HTTP bootstrapping servers, VCS servers etc. This is the default mode.
Login name
This is the user name part of the credentials used to authenticate towards
the HTTP server when using HTTP provisioning.
Password
This is the password part of the credentials used to authenticate towards
the HTTP server when using HTTP provisioning.
HttpMethod
This configuration parameter indicates whether the E20
Post/Get
should use HTTP GET or HTTP POST when contacting the HTTP server
during HTTP provisioning.
RTP
Ports
Range: Start and Stop defines defines the range of RTP ports that
will be used for transmitting media. Changing these values requires a
reboot.
SIP
Profile 1–3
The SIP URI or number is used to address the system. This is the URI
that is registered and used by the SIP services to route inbound calls to
Administrator guide
Contact us
www.cisco.com