Common Operations - Booster BDVM-Ducter Operational Manual

Common Operations

02
To Select Source by Menu
In any mode, touching on the screen shows
the menu as follow:
Please sliding horizontally on the screen
turns over the menu as the figure below:
Click your desired item to enter corresponding
mode, and click SETUP to enter into the
setting menu.
If you want to navigate, click the GPS icon;
if it did not enter into, that means the unit
does not include the function.
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
Press RES button in the panel w
ith a
object (such as a ball
pointed pen),
to set the unit to initial status.
Note:
* When ome errors occur on the
s display, you can
also press RES button to resume to normal,
and it will erase the clock setting and some
memorized functions.
*
This function can only be operated by the
main unit.
1 2
Turning the Unit On/Off
1 PWR button to turn on the
Briefly press
unit in the waiting status, and then press and
hold it to turn off.
Note:
*
Pressing PWR button on the main unit also
performs the same function.
Volume Control
Press 14 VOL+ button to increase sou- the
14 VOL- button to decr-
nd level and press
ease sound level. the
Note:
* Pressing VOL on the main unit also performs
the same function.
Setting the Sound Characteristics
14
SEL button
Repeatedly and briefly press
to select the desired mode in the following
order:
VOL BAL FAD
BAS
WOO TRE
After selecting the desired mode, you can
14
adjust the current level by pressing
VOL
.
buttons
Note:
*
This function is only performed by remote.
point
CD/MP3/SD/USB
On Screen Display
During CD status, press OSD button the
display shows:
Single elapsed Single remain
Display Off
Note:
*
This function is operated by using the remote
control.
Program Playing
13
During CD mode, press PROG, the TFT
displays the program menu. Press NUMBER
BUTTONS to select the track Number and
27
then press to move the cursor to START,
press ENTER to start program playing;
move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
to and press ENTER to the previous page;
move the cursor to and press ENTER to
the next page. During this process, press
18 to cancel the program playing.
Note:
*
The function is only valid on remote control.
* 22
Press CLEAR to clear the mistake input.
Eject SD Card
Push SD card to eject it.
During SD playing mode, to eject SD card to
switch to Disc mode; If there is no disc in
the main unit, it will switch to USB mode,
or else, it will switch to Radio mode.
During other modes, to eject SD card to keep
the previous mode.
Eject USB
Pull USB to eject it.
During USB playing mode, to eject USB to
switch to Disc mode; If there is no disc in
the main unit, it will switch to SD Card mode,
or else, it will switch to Radio mode.
During other modes, to eject USB to keep
the previous mode.
2 9
05