Specifications - Booster BDVM-Ducter Operational Manual

01 Before You Start

Specifications

General
Power Requirement 14.4V DC
(11-16V allowable)
Load Impedance
100W x 4
Max.Power Output
7dB
Tone Controls
Bass 100Hz
Treble 10KHz
FM Section
87.5-108(MHz)
Tuning Range
(Optional) (Europe)
87.5-107.9(MHz)
(U.S.A.)
65-74(MHz)
(Russia)
10.7MHz
IF Range
10dBuV
Usable Sensitivity
(-30dB)
60dB
Signal-to-noise Ratio
30dB 1KHz
Stereo Separation
40 -12KHz
Frequency Response Hz
10
AM Tuner Section
522-1620(KHz)
Frequency Range
(Optional) (Europe/Russian)
530-1710 (KHz)
(U.S.A.)
IF Range 450KHz
28dBuV
Usable Sensitivity
(-20dB)
VCD/CD Player Section
VCD Signal System
AUTO/PAL/NTSC
60dB
Signal-to-noise Ratio
60dB(1KHz)
Separation
0.3%
Distortion
DVD Player Section
DVD Signal System
AUTO/PAL/NTSC
2
Channels
Frequency Response 40Hz to 16KHz
60dB
Signal-to-noise Ratio
60dB
Separation
Note:
Due to continuous product improve-
ment, specifications and design are
subject to change without prior notice.
Tuner
MO/ST Selector
During radio status, you can press 6
button on the remote control to select
MONO
mode or STEREO mode.
Stereo reception is charged when
STEREO
appears.
It is switched to MONO mode when
MONO
appears.
Note:
It is only valid on remote control
*
* Switch to MONO compulsively to improve
the listening quality when week signal.
It is only valid in FM tuning .
*
Scanning/Memorizing Stations
Automatically
4
During radio status, briefly press
button on the remote control to scan each
station 6
stored seconds respectively wh-
Number Buttons (from 1
2 3
ich stored in
6) . You can press
to the cor responding N-
umber Buttons or AMS but ton when your
desired station is charged. And it starts pl-
aying that station.
4
,
When press and hold AMS button it
will activate automatically memory storing
function. The radio automatically selects
station and has it stored in any one of
2 3 Number Buttons (from1 to 6) .
Note:
The unit can be stored up to 6 stations for
*
each band.
*
It is only valid on remote control.
Goto FREQ
2
Press GOTO, and the monitor shows:
ST
FREQ, then press the Number to input the
valid frequency, then the TV program will
be played.
Note:
* It is only valid on remote control.
* It is only valid when GOTO FREQ is on in
main menu.
.
Number Buttons
During radio status, press Number Buttons
to receive the stored stations.
During radio status, Number Buttons
(from 1 to 6)
23 can help you yo- store
ur favorite station. You can follow the
as below:
AMS
1
When receiving a station,press and hold
any one of the Number Buttons
(from 1 to 6) until the number app-
ears on the LCD, which indicates that
station is already stored in the corresp-
onding number button.
4
2
Press and hold AMS button to receive
stations automatically, and store them in
1 to 6 number respectively.
a
3
Press and hold another number button
the
more than 2 seconds when listening in
a station in one number button s, the
station will be stored in that number
button.
Note:
Clicking on the screen performs t
* 5
function.
06
steps
3 1