Table of Contents
Advertisement
TROUBLESHOOTING
48
EN
LENS CAP
Appears for 5 seconds after power is turned on if
the lens cap is attached or when it is dark.
A. DUB ERROR!
Appears if Audio Dubbing is attempted on a
blank portion of a tape. (
A. DUB ERROR!
<CANNOT DUB ON A LP RECORDED
TAPE>
<CANNOT DUB ON A 16BIT RECORDING>
<CHECK TAPE'S ERASE PROTECTION
TAB>
Appears if Audio Dubbing is attempted on a
tape recorded in the LP mode. (
Appears if Audio Dubbing is attempted on a
tape recorded in 16-BIT audio. (
Appears if A. DUB (D) on the remote control is
pressed when the erase protection tab is set to
"SAVE". (
pg. 43)
INSERT ERROR!
Appears if Insert Editing is attempted on a blank
portion of a tape. (
INSERT ERROR!
<CANNOT EDIT ON A BLANK PORTION>
<CANNOT EDIT ON A LP RECORDED
TAPE>
<CHECK TAPE'S ERASE PROTECTION
TAB>
Appears if Insert Editing is attempted on a
blank portion of a tape.
Appears if Insert Editing is attempted on a tape
recorded in the LP mode. (
Appears if INSERT (I) on the remote control
is pressed when the erase protection tab is set
to "SAVE". (
pg. 44)
HDV
Appears when pictures recorded in the HDV
format are detected. The pictures in the HDV
format cannot be played back with this
camcorder.
pg. 43)
pg. 43)
pg. 43)
pg. 44)
pg. 44)
?
Appears when playing back a file that is not
compatible with DCF or a file with a size that is
not compatible with this camcorder.
UNIT IN SAFEGUARD MODE
REMOVE AND REATTACH BATTERY
The error indications (01, 02 or 06) show what
type of malfunction has occurred. When an error
indication appears, the camcorder turns off
automatically. Remove the power supply
(battery, etc.) and wait a few minutes for the
indication to clear. When it does, you can
resume using the camcorder. If the indication
remains, consult your nearest JVC dealer.
UNIT IN SAFEGUARD MODE
EJECT AND REINSERT TAPE
The error indications (03 or 04) show what type
of malfunction has occurred. When an error
indication appears, the camcorder turns off
automatically. Eject the cassette once and re-
insert it, then check if the indication clears.
When it does, you can resume using the
camcorder. If the indication remains, consult
your nearest JVC dealer.
Advertisement
Table of Contents
