Playback Menus - JVC GR-DF428 Instructions Manual

Playback Menus

[ ] = Factory-preset
SOUND MODE and NARRATION
During tape playback, the camcorder detects the
sound mode in which the recording was made,
and plays the sound back. Select the type of
sound to accompany your playback picture.
According to the menu access explanation on
page 27, select "SOUND MODE" or
"NARRATION" from the Menu Screen and set it
to the desired parameter.
SOUND MODE
[STEREO ]: Sound is output on both "L" and
"R" channels in stereo.
SOUND L : Sound from the "L" channel is
output.
SOUND R : Sound from the "R" channel is
output.
NARRATION
[OFF]: Original sound is output on both "L" and
"R" channels in stereo.
ON: Dubbed sound is output on both "L" and "R"
channels in stereo. (
MIX: Original and dubbed sounds are combined
and output in stereo on both "L" and "R"
channels.
REC MODE
Allows you to set the video recording mode (SP
or LP) depending on your preference. It is
recommended you use "REC MODE" in VIDEO
Menu when using this camcorder as a recorder
during dubbing. ( pg. 40, 41)
BLANK SRCH
pg. 22, "Blank Search"
VIDEO
pg. 43)
[SP] / LP
MENUS FOR DETAILED ADJUSTMENT
31
EN