Dell Networking N4000 Series Getting Started Manual page 224

세션 예
Easy Setup Wizard
,
• SNMP
•
.
• OOB
.
POST
(Unit 1 - Waiting to select management unit)>
Applying Global configuration, please wait...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly as
possible. You can skip the setup wizard, and enter CLI mode
to manually configure the switch. You must respond to the
next question to run the setup wizard within 60 seconds,
otherwise the system will continue with normal operation
using the default system configuration. Note: You can exit
the setup wizard at any point by entering [ctrl+z].
Would you like to run the setup wizard (you must answer this
question within 60 seconds)? [Y/N] y
222
.
ip
root
IP
<Enter>
.
.
.
.
192.168.2.1
[ ]
Dell Easy Setup Wizard
admin123
.
.
.
.
.