Table of Contents
Advertisement
1
Desktop Holder
Desktop Holder may be purchased separately.
3
Use specified Charger only.
1
Insert Charger connector into Desktop Holder
until it clicks
^ Connection Port is on the back of Desktop Holder.
2
Plug Charger into AC outlet
^ Extend Charger blades. (Fold back
when not in use.)
1-18
Small Light
1
2
Connection Port
AC 100V Outlet
1
Release Tabs
AC Charger
Charger Connector
Insert cord
into the groove.
Arrows
3
Gently insert handset into Desktop Holder
^ Fit tabs into slots as shown in 1 and push handset as
indicated in 2 until it clicks into place (resting flat).
^ Charging starts and Small Light illuminates red (see P.1-15).
Charging takes approximately 150 minutes.
^ Charging is complete when Small Light goes out.
4
After Charging
Unplug Charger, then disconnect handset
^ To remove connector, squeeze release tabs.
2
Blades
4
Advertisement
Table of Contents
