Usim Pins - Sharp SoftBank 812SH Instruction Manual

1

USIM PINs

There are two Security Codes for USIM Card: PIN1 and PIN2.
PIN1
A 4-digit to 8-digit Security Code to prevent unauthorised
use of handset.
^ PIN 1 is 9999 by default; change as needed (see P.9-25
"Change PIN").
^ Activate PIN Entry (see P.9-24) to require PIN1 entry each
time handset (USIM Card inserted) is turned on.
PIN2
Required to clear Call Costs or set Max Cost (see P.2-15).
PIN 2 is 9999 by default; change as needed (see P.9-25
"Change PIN").
1-6
PIN Lock & PUK Code
PIN1 Lock or PIN2 Lock is activated if PIN1 or PIN2 is
incorrectly entered three times consecutively. Cancel PIN
Lock (see P.9-24) by entering the Personal Unblocking Key
(PUK Code). For information on PUK Code, contact SoftBank
Customer Centre, General Information (see P.20-29).
H
^ If PUK Code is incorrectly entered ten times
Note
consecutively, USIM Card is locked and handset is
disabled. Write down PUK Code.
^ For USIM Card unlocking procedures, call SoftBank
Customer Centre, General Information (see P.20-29).
^ Emergency calls (110, etc.) are not possible when PIN
Entry (see P.9-24) is active. See P.2-3 "Emergency Calls".