Sharp SoftBank 812SH Instruction Manual page 196

H
^ Identification accuracy is not guaranteed. SoftBank
Note
cannot be held liable for misuse or any damages
associated with the use of Face Recognition.
^ Handset Code is required to activate/cancel Face
Recognition. Changing the code (see P.9-28) helps
enhance security.
^ S! FeliCa is available even when Face Recognition is
active.
Saving User Information
Save a name and portrait as well as a question and an
answer to the question. In case recognition fails, enter the
answer to unlock handset.
^ Save up to five users (with up to five portraits each).
^ If no question or answer is saved, enter Handset Code to
unlock handset.
H A
Settings Phone Settings (F)
Main Menu
A
Recognition User Registration
Enter Handset Code and press b
1
Select from User 1 to User 5 and press b
2
C
To edit user information, select a user
C
To delete users, select one
A Press b
Yes
Select User Name: and press b
3
A A
Locks Face
A Press b
A Press N . A
Choose
Enter name and press b
4
Select Register Riddle: and press b
5
Enter a question and press b
6
Select Register Answer: and press b
7
Enter the answer and press b
8
^ Capture and save portrait if not already saved (see below).
9 Press M q to save
CSaving Portraits
Save up to five portraits per user. Change location, face
angle, accessory, brightness, etc. for each shot.
^ Saving multiple portraits increases recognition accuracy.
However, security will be compromised.
^ A person's portraits can be saved to multiple users; this may
increase recognition accuracy.
^ Look straight into lens and frame whole face with no
expression; adjust face size (may not be saved if too small).
Stay still until shooting is completed.
^ Follow these steps after Step 8 above.
Select Face Image: and press b
1
9
9-21