Table of Contents
Advertisement
Activating Remote Lock
CVia Mail
1
Use S! Mail/e-mail to send password to handset
^ Enter password as subject; leave other fields blank.
^ To confirm IC Card Lock status, send a message via phone or
PC with specified mail address (see P.17-5 "Mail Remote Lock
Password/Address").
After Handset Receives Message
C IC Card Lock is set and notice is sent from handset to
specified mail address.
H
Note
If handset cannot receive mail IC Card Lock is not set.
CVia Phone
1
Using one of the specified phones, call handset
2
End the call
The call is recorded as a Missed Call on your handset.
^ Within three minutes, repeat Steps 1 - 2 until the specified
number of Missed Calls are recorded.
^ Public phones can be used for this function if Set Public
Phone is activated beforehand.
^ Send Caller ID when placing calls from specified phone.
(Caller ID is not required for public phones.)
After Specified Number of Missed Calls
C IC Card Lock is set; a message announces Remote Lock activation.
H
^ Missed Call count is reset by calls from numbers not
Note
saved for this function. If series is interrupted, start over
from the beginning.
^ When Call Forwarding is active, Missed Calls may not
be recorded.
Interface Settings
Set handset response to reader/writer commands: Choose
On for S! Appli to activate S! Application, Browser to access
Internet, Messaging to activate mail, Vibration to vibrate
handset, and Pop-up Message to open pop-up message.
Interface Settings is On for all items by default.
H
A
Main Menu
Lifestyle-appli
Enter Handset Code and press b
1
Select from S! Appli to Pop-up Message and press b
2
Choose On or Off and press b
3
A
IC Card Settings
Interface Settings
17
17-7
Advertisement
Table of Contents
