Unpacking Instructions; Grounding Instructions - Weston 08-0801-W User Manual

UNPACKING INSTRUCTIONS

.
Remove all parts from packaging material and check to be sure there are no
missing parts.
.
Retain packaging material for storage of the Grinder and Grinder parts when not
in use.

GROUNDING INSTRUCTIONS

GROUNDING
This appliance must be grounded while in use to protect
the operator from electrical shock.
is equipped with a 3-conductor cord and a 3-prong
grounding type plug to fi t the proper grounding-type
receptacle. The appliance has a plug that looks like
Figure A. An adaptor, Figure B, should be used for
connecting Figure A plugs to two-prong receptacles.
The grounding tab which extends from the adaptor must
be connected to a permanent ground such as a properly
grounded outlet box as shown in Figure C using a metal
screw.
EXTENSION CORDS
Use only 3-wire extension cords which have 3-prong
grounding-type plugs and a 3-pole cord connector
that accepts the plug from the appliance. Use only
extension cords having an electrical rating not less than
the rating of the appliance. DO NOT use damaged
extension cords. Examine extension cord before using
and replace if damaged. DO NOT abuse extension
cord and do not yank on any cord to disconnect. Keep
cord away from heat and sharp edges.
WARNING!
Before cleaning, assembling or disassembling the
Grinder, make sure the Grinder Motor is OFF and the PLUG IS REMOVED
FROM THE OUTLET/POWER SOURCE!
If any components of this unit are broken or the unit does not operate
properly, call Weston Products LLC Toll Free at
Monday thru Friday 8:00am-5:00pm EST. Outside the U.S. call 440-638-3131
The appliance
1-800-814-4895
-6-
Circuit
Grounding
Figure A
Conductor
Grounding
Prong
Figure B
Metal
Grounding
Screw
Cover of
Grounded
Outlet Box
Figure C
Grounding
Means
AA2220