Training; Stopwatch Mode - Freelap Stopwatch User Manual

3 TRAINING

• STOPWATCH MODE
- START
Switch to TIMING (CHR) by pressing the MODE button once (you must
be in TIME mode).
The stopwatch then displays how many laps can be stored before the
memory is full. Following this the stopwatch will go into timing mode. The
display will then start flashing which means it is ready to start.
Chr
690
The stopwatch can start automatically:
• by leaving the transmitter field
• by passing the first transmitter (flying start)
• by activating the starting gate Tx Gate (alpin skiing)
• by activating the Tx Touch transmitter (athletics)
- LAP
At each transmitter, the LAP time remains on the
screen (to hold the time see section 2 - stopwatch
settings) to allow the user to view as required (ex:
L3 = LAP 3). Each time a LAP is registered the
stopwatch will ''beep'' twice as an audible indication.
- SUBTOTAL (BLOCK OF LAP)
For training purposes the stopwatch can be stopped to create subtotal or
block in two ways:
- Press and hold the STOP button for 1s (this is confirmed with a long
''beep'').
- Remain in the transmitter field and the stopwatch will automatically
stop.
Chr
FREE
EN 6
• •
00'00''
00
L3
00'14''
43