Settings; Time, Date, Alarm And Backlight; Stopwatch - Freelap Stopwatch User Manual

2 SETTINGS

• Time, Date, Alarm and Backlight
To change the time, date and alarm, press the SELECT button for 1
second (SEL/LIGHT).
To change the flashing value, use the UP or DOWN arrow buttons (right
buttons). Press the SELECT button to confirm and move to the next
value.
If you don't want to change all the settings, press the MODE button to
confirm and return to TIME mode.
- Enable / Disable the alarm
To display the alarm, press the UP arrow button. To enable / disable,
press the DOWN arrow bouton.
- Display Date
This appears only by pressing the DOWN arrow button.
- Backlight
The stopwatch can be used at night, just press the SEL/LIGHT button
(except in timing mode (CHR))

• Stopwatch

The stopwatch settings have to change dependant on the sport it is being
used for.
There are 3 modes:
- STOP TIME
This is the minimum duration required in the transmitter field to create a
subtotal (intermediate stop).
The choice of duration (5 or 10 seconds) is based on the activity (see
table below).
EN 4
• •