Freelap Stopwatch User Manual page 7

- SAFE TIME
This is the minimum possible time between 2 transmitters. If this time is
shorter, a Lap will not be recorded.
Recommended values for each sport:
SPORT
MTB
BMX
ATHLETICS
SWIMMING
It is also possible to use the stopwatch without transmitters, as a simple
stopwatch. For this, we have to change the SAFE TIME value by choosing
''no''(see training section).
For sports where the speed is slower (e.g. swimming), the STOP TIME
and SAFE TIME value has to be 10 seconds.
- HOLD TIME
When passing a Freelap transmitter the stopwatch will show a LAP TIME.
The HOLD TIME is the period which the LAP TIME stays displayed on
the stopwatch screen e.g. 10, 20 seconds or until the next LAP.
If you don't want to change all the settings, press the MODE button to
confirm and return to TIME mode.
STOP TIME (seconds)
5
5
5
10
EN
•
SAFE TIME (seconds)
5
1
1
1
10