DYMO® Digital USB Postal Scale This User Guide provides instructions for USB port ® using your DYMO Digital USB Postal Scale. Power Visit www.dymo.com/register to register your scale. Setting Up the Scale The scale is powered through a USB port on Zero/ your computer.
Turning On the Power The scale has an Auto Shut Off feature which automatically turns off the scale after three minutes of inactivity. To turn the scale on Press on the front of the scale. When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing items.
Using the Hold Feature When an item being weighed extends over the front of the scale and you cannot see the display, you can freeze the display so that the weight is still displayed after removing the item. To use the Hold feature 1.
In both of these cases, remove the item from the platform and press to return the display to 0 g, 0.0 oz, or 0.00 oz. If you need further assistance, you can obtain support at www.dymo.com.
This warranty does not cover loss of or damage to a computer or other devices connected directly or indirectly to this Dymo product. This warranty also does not cover any loss of or damage to data, programs, records or other information.
We also welcome your suggestions for additional topics you would like to see covered in the documentation. Send email feedback to: documentation@dymo.com Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please...
Cyfrowa waga pocztowa DYMO® z gniazdem USB Niniejsza instrukcja zawiera opis Port USB obsługi cyfrowej wagi pocztowej Zasilanie ® DYMO z gniazdem USB. Zarejestruj swoją wagę na stronie www.dymo.com/register. Konfiguracja wagi Waga jest zasilana przez port USB Zero/ Tara w komputerze. Kiedy waga nie jest Wyświetlacz LCD...
Włączanie zasilania Waga posiada funkcję automatycznego wyłączania, która automatycznie wyłącza ją po trzech minutach przerwy w pracy. Aby włączyć wagę: Naciśnij przycisk z przodu wagi. Przy pierwszym włączeniu wagi odczekaj kilka sekund, zanim rozpoczniesz ważenie. W stanie gotowości wyświetlacz pokazuje 0 g, 0.0 oz, lub 0.00 oz. Aby wyłączyć...
Używanie funkcji zatrzymania Kiedy ważony przedmiot wystaje nad przodem wagi, zasłaniając wyświetlacz, można zatrzymać wyświetlaną wartość, która będzie widoczna po zdjęciu przedmiotu. Aby użyć funkcji zatrzymania: 1. Naciśnij przycisk HOLD W stanie gotowości dioda LED pulsuje, a wyświetlacz pokazuje HOLD, a następnie 0 g, 0.0 oz, lub 0.00 oz.
10-40 °C Interfejs Urządzenie ważące HID USB 2.0 Low Speed Zasilanie USB lub 3 baterie alkaliczne AAA Informacje na temat naszych wag można znaleźć w witrynie www.dymo.com. Rozwiązywanie problemów Problem/ komunikat o błędzie Rozwiązanie Brak obrazu na wyświetlaczu Sprawdź, czy waga jest podłączona, lub wymień baterie.
Page 13
że posiada on wady projektowe, materiałowe lub wykonawcze, naprawimy go lub wymienimy bezpłatnie, wedle naszego uznania, po czym zwrócimy produkt użytkownikowi. Użytkownik ponosi pełny koszt wysyłki produktu do firmy Dymo, ale nie płaci za przegląd ani za przesyłkę zwrotną. GWARANCJA NIE OBEJMUJE Niniejsza gwarancja nie obejmuje szkód lub uszkodzeń...
Page 14
Doceniamy także wszelkie uwagi dotyczące dodatkowych tematów do umieszczenia w dokumentacji. Opinie prosimy przesyłać na adres: documentation@dymo.com Należy pamiętać, że ten adres e-mail służy do przesyłania wyłącznie opinii na temat dokumentacji. W przypadku pytań technicznych należy skontaktować się z obsługą klienta.
Need help?
Do you have a question about the M5 and is the answer not in the manual?
Questions and answers