Setting Jumpers - Delta Components Fanless Box PC 31xx series Manual

2.3 Setting Jumpers

A jumper is the simplest kind of electric switch. It consists of two metal pins and a cap. When
setting the jumpers, ensure that the jumper caps are placed on the correct pins. When the
jumper cap is placed on both pins, the jumper is SHORT. If you remove the jumper cap, or
place the jumper cap on just one pin, the jumper is OPEN. Please see the following
illustrations
Table 2-1: Setting Jumpers
D E L T A C O M P O N E N T S G m b H
Auweg27, D-79761 Waldshut-Tiengen Seite - 14 -