Synchronized Disc Recording - JVC UX-G70 Instructions Manual

Synchronized Disc Recording

You can start and stop both disc play and tape recording at
the same time.
To record the entire disc
1
Load a disc and insert a recordable cassette.
• If the current playing source is not the disc player, press
DVD/CD 3, then 7.
2
Start recording.
The System automatically
REC
creates 4-second blanks between
the tunes recorded on the tapes.
On the main unit
• When either disc play* or recording ends, both disc player
and the cassette deck stop at the same time.
* For DVD Video: When a title is finished playing.
To record Program Play
1 Select Program Play (and make a program), but do not
start playback.
2 Press REC to start recording.
• When disc play stops, recording stops automatically.
30
To record only your favorite track
INFO
You can specify tracks to be recorded on the tape while
listening to a disc (except for DVD Video/DVD-VR).
1
2
3
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
Start playing a disc.
DVD/CD
While a track you want to record on the tape is
playing...
The disc player returns to the
REC
beginning of that track and the
track is recorded on the tape.
After recording the track, the
disc player and cassette deck
On the main unit
automatically stop.
Repeat steps 1 and 2 to record other tracks you want.
• You can change the disc if necessary.