Connections - JVC UX-G70 Instructions Manual

Do not connect the AC power cord until all other
connections have been made.
• Connect VIDEO OUT directly to the video input of your
TV. Connecting VIDEO OUT to a TV via a VCR may
interfere with your viewing when playing back a copy-
protected disc. Connecting VIDEO OUT to an integrated
TV/VCR system may also interfere with your viewing.
Rear panel
Front panel
Pull down the cover until you hear a clicking sound.
Attaching the core filter to the USB cable to reduce interference
*
At the front panel
Stopper

Connections

From the PC: See page 12.
From the portable audio device: See page 5.
From the headphones: See page 7.
Wind firmly the USB cable twice.
• Keep close between the plug connected to the
System and the core filter.
• Do not damage the USB cable by applying
excessive force when winding.
Supplied accessories
Check to be sure that you have all the following items.
• FM antenna (x1)
• AM loop antenna (x1)
• Composite video cord (x1)
• Core filter* (x1)
• Remote control (x1)
• Batteries (x2)
• AC plug adapter (x1) (except for the Middle East)
If any item is missing, consult your dealer immediately.
~
From the powered subwoofer
See page 4.
Ÿ
From AM/FM antenna
See page 4.
!
From the input of TV/monitor
See page 4.
⁄
From the digital input of digital audio component
See page 4.
Voltage selector: See page 5.
@
From the speakers
See page 5.
¤
To a wall outlet
Plug in the AC power cord only after all connections
are complete.
• If the wall outlet does not match the AC plug, use the
supplied AC plug adapter (except for the Middle East).
Close the core
filter until you
hear a clicking
sound.
3