Connecting The Powered Subwoofer; Connecting To An Analog Component; Connecting To A Digital Component; Connecting The Power Cord - JVC SP-PWS8 Instructions Manual

Connections
Connecting the powered
subwoofer
Center unit
System cord
(supplied)
Align the 5 marks.
Connecting to an analog
component
You can enjoy the sound of an analog component.
To audio output
Cassette recorder
NOTE
• If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this system, the sound output
through this system may be distorted.
• When playing a video component such as a VCR;
To listen to the sound, select "AUX" as the source to play.
•
(A pg. 17)
To see the picture, connect the video output jack of the component
•
to the video input jack of the TV directly, and select the correct
input mode on the TV.
13
Powered
subwoofer
Align the 5 marks.
Center unit
LEFT
RIGHT
AUX IN
RCA pin plug cord
(not supplied)
VCR
TV
Connecting to a digital
component
You can enjoy the sound of a digital component.
Center unit
OPTICAL
Digital optical cord
DIGITAL
(not supplied)
IN
* DBS = Direct Broadcasting Satellite
NOTE
When playing a video component such as a DBS tuner;
• To listen to the sound, select "AUX DIGITAL" as the source to play.
(A pg. 17)
• To see the picture, connect the video output jack of the component to
the video input jack of the TV directly, and select the correct input
mode on the TV.
Connecting the power
cord
Make sure that all other connections have been completed.
Center unit
AC IN
Power cord
(supplied)
Plug into AC outlets.
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
DBS * tuner
MD recorder
To digital optical
output
Powered
subwoofer
Power cord