Database; Display - SanDisk Sansa e200 Series Manual Manual

Chapter 8. General Settings
Only when viewing all types. Only show file extensions when Show Files is set
to All.
Follow Playlist. This option determines what directory the File Browser displays
first. If Follow Playlist is set to Yes, when you enter the File Browser from
the WPS, you will find yourself in the same directory as the currently playing file.
If Follow Playlist is set to No, when you enter the File Browser from the
WPS, you will find yourself in the directory you were in when you last left the
File Browser.
Show Path. If this setting is set to Full Path the full path to the current directory
will be displayed on the first line in the File Browser. If set to Current
Directory Only only the name of the current directory will be displayed.
This has a similar effect on the Database browser. If set to Current Directory
Only or Full Path, then the title of each menu will be displayed on the first line
in the Database Browser.

8.3. Database

This sub menu allows you to configure the database. See section
information about using the database.

8.4. Display

LCD Settings. This sub menu contains settings that relate to the display of the player.
Backlight. The amount of time the backlight shines after a key press. If set to
Off, the backlight will not light when a button is pressed. If set to On, the
backlight will never shut off. If set to a time (1 to 90 seconds), the backlight
will stay lit for that amount of time after a button press.
Backlight (While Plugged In). This setting is equivalent to the Backlight set-
ting except it applies when the player is plugged into the charger.
Backlight on Hold. This setting controls the behavior of the backlight when the
Hold switch is toggled. If set to Normal the backlight will behave as usual.
If set to Off the backlight will be turned off immediately when the Hold
switch is engaged and if set to On the backlight will be turned on and stay
on while the Hold switch is engaged.
Caption Backlight. This option turns on the backlight a number of seconds before
the start of a new track, and keeps it on for the same number of seconds after
the beginning so that the display can be read to see song information. The
amount of time is determined by the value of the backlight timeout setting,
but is no less than 5 seconds.
The Rockbox manual
(version rUnversioned directory-150220)
4.2 (page 28) for more
Sansa e200 and e200R Series
68