Yamaha YZ250F Owner's Service Manual page 251

STEERING
4. Install:
• Steering ring nut 1
Tighten the steering ring nut using the
steering nut wrench 2.
Refer to "STEERING HEAD INSPEC-
TION AND ADJUSTMENT" section in the
CHAPTER 3.
5. Check the steering stem by turning it lock
to lock. If there is any binding, remove the
steering stem assembly and inspect the
steering bearings.
6. Install:
• Washer 1
7. Install:
• Front fork 1
• Upper bracket 2
NOTE:
• Temporarily tighten the pinch bolts (lower
bracket).
• Do not tighten the pinch bolts (upper bracket)
yet.
8. Install:
• Washer 1
• Steering stem nut 2
5 - 51
CHAS
7 Nm (0.7 m · kg, 5.1 ft · lb)
145 Nm (14.5 m · kg, 105 ft · lb)