Using The Switch Configuration Wizard - Apex Digital Apex EmergeCard Remote Access User Manual

Using the Switch Configuration Wizard

To use the Switch Configuration Wizard
1 Double-click the Emerge icon on the desktop of the Administrator Remote Control console to open
Emerge.
2 If this is the first time you have launched Emerge or if no windows were open the last time
Emerge was closed, the Switch Configuration Wizard dialog box appears.
3 If a console switch is attached to your Emerge system, select Yes and click Next to display a list
of switch options.
Select Yes if you are attached to a switch and want integrated control.
-or-
Select Yes, but I want to use the same window for all ports if you are connected to a switch
but want to maintain manual controls. (If you select this, proceed to step 15.)
-or-
Select No if you are connected to a server rather than a switch. (If you select this, proceed to
step 17.)
Emerge Card Remote Access User Guide Operation 21