To connect to an OutLook multi-user switch
1
Make sure the Emerge system is turned off and unplugged.
2
Place the unit in the desired location.
3
Connect the video, mouse, and keyboard interconnecting cables to their respective jacks on the
back panel of the EmergeCard.
4
Connect the other end of the mouse, monitor, and keyboard interconnecting cables to their
respective jacks in one of the console ports on the back panel of the OutLook switch.
5
Connect the local mouse and keyboard to the jacks marked with their respective symbols on the
back panel of the Emerge system.
6
Plug in your remote access connection to the modem or network connection port.
7
Plug the power cord into its socket on the back panel of the Emerge system.
Emerge Card Remote Access User Guide
Installation
12