Connections To The Motherboard - SOYO SY-K7VTA PRO Quick Start Manual

Connections to the Motherboard

Step 2.
This section tells how to connect internal peripherals and the power supply to the Motherboard.
The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis
Fan, Front Panel Devices (STR LED Internal Speaker, Reset Button and IDE LED Switch.),
Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on connecting internal and external peripherals to your new SY-K7VTA
PRO Motherboard, please refer to
Technical Reference
online manual on the CD-ROM.
Connectors and Plug-ins
Standard IrDA (Infrared Device Header): SIRCON
Pin1 Pin2
+5V NC
USB3_4: USB3
Pin1 Pin3
+5V Data(-)
CPU Cooling Fan: CPUFAN1
Pin1 Pin2
GND +12V
Chassis Fan: CHAFAN
Pin1 Pin2
GND +12V
Connect the CD Line-in cord from the CD-ROM device to
the matching header CDIN1
STR LED PWRBT
HDD LED
Speaker
HDD LED
Pin1 Pin2
LED GND
Connect your power switch to this header (momentary switch type).
To turn off the system, please press this switch and hold down for longer than 4
seconds.
SY-K7VTA PRO Quick Start Guide
SY-K7VTA PRO Motherboard User's Guide and
Pin3 Pin4 Pin5
IRRX GND IRTX
Pin5 Pin7
Data(+) GND
Pin3
SENSOR
Pin3
SENSOR
CD Line-in: CDIN1
Reset
Pin1
1 1
LED
Pin1
VCC
Power LED
PWRBT
Pin1 Pin2
PW-BT GND Power RST
ATX POWER On/Off : PWRBT
9
Wake-On-LAN Header: J10
Pin1 Pin2
5VSB GND
USB3_4: USB4
Pin2 Pin4 Pin6
+5V Data(-) Data(+)
CPU Cooling Fan: CPUFAN2
Pin1 Pin2
GND +12V
Chip Cooling Fan: ChipFAN
Pin1 Pin2
GND +12V
Pin 1 Pin 2
L G
Power LED
Pin2
N C
Speaker
Pin2 Pin3
NC NC
RESET
Pin1 Pin2
GND LED Anode
Pin3
RING
Pin8 Pin10
GND GND
Pin3
NC
Pin3
NC
Pin 3 Pin 4
G R
Pin3
G N D
Pin4
Speaker out
STR LED ¡ °
Pin1 Pin2
GND