Switches
Ignition Switch
Leaving the keys in the ignition can lead to unauthorized use of the vehicle
resulting in serious injury or death. Always remove the ignition key when the
vehicle is not in use.
The ignition switch is a three-position, key-operated switch. Use the
ignition switch to start the engine. See page 57 for starting procedures.
The key can be removed from the switch when it is in the OFF position.
OFF
The engine is off. Electrical circuits are off, except accessory 12V.
ON
Electrical circuits are on. Electrical equipment can be used.
START
Turn the key to the START position to engage the electric starter.
The key returns to the ON position when released.
Light Switch
Use the headlight switch to turn the lights on and
off.
NOTE:
The ignition switch must be in the ON position
to operate the headlights.
All Wheel Drive (AWD) Switch
The AWD Switch has two positions:
• All Wheel Drive (AWD)
• Two Wheel Drive (2WD).
Press the top of the rocker switch to engage All
Wheel Drive. Press the bottom of the switch to
operate in two wheel drive.
See page 46 for AWD operating instructions.
Auxiliary Outlet
The 12-volt accessory plug receptacle has spade
connections on the back that may be used to power
an auxiliary light or other optional accessories or
lights. The connections are under the dash.
FEATURES AND CONTROLS
WARNING
ON
OFF
AWD
2WD
43