Reproducing The Sound Field - JVC RX-6018VBK Instructions Manual

Audio/video control receiver

Hide thumbs Also See for RX-6018VBK:

Service manual (53 pages)

Instructions manual (36 pages)

Service manual (89 pages)

Table Of Contents

Table of Contents

DAP modes

The sound heard in a concert hall or club consists of direct sound

and indirect sound — early reflections and reflections from behind.

Direct sounds reach the listener directly without any reflection. On

the other hand, indirect sounds are delayed by the distances of the

ceiling and walls. These direct sounds and indirect sounds are the

most important elements of the acoustic surround effects. The DAP

mode can create these important elements, and gives you a real

"being there" feeling. This mode can be used when the front

speakers are connected to this receiver (without respect to the

rear/center speaker connection).

You can select one of the following to your preference.

LIVE CLUB:

Gives the feeling of a live music club with a low

ceiling.

DANCE CLUB: Gives a throbbing bass beat.

HALL:

Gives clear vocal and the feeling of a concert hall.

PAVILION:

Gives the spacious feeling of a pavilion with a high

ceiling.

Available DSP modes according to the input mode

BUTTON

(On the remote control)

BUTTON

SURROUND ON/OFF

(On the front panel)

MODE

SURROUND ON

ANALOG

(2 CH)

(DOLBY PRO LOGIC)

ANALOG

(5.1 CH)

(DOLBY PRO LOGIC)

LINEAR PCM

(DOLBY PRO LOGIC)

DOLBY DIGITAL

(DOLBY DIGITAL)

DTS

(DTS SURROUND)

When 2 channel signal comes in, DOLBY PRO LOGIC is selected. When other signals come in, DOLBY DIGITAL is selected.

When 2 channel signal comes in, DOLBY PRO LOGIC is selected. When other signals come in, DTS SURROUND is selected.

You can also use SURROUND on the remote control to activate the surround mode.

THEATER

LIVE CLUB