Error Messages; Coil Identification - Minelab X-terra 305 Instruction Manual

66

error messages

Coil Unplugged
The coil has been 1
disconnected from
the detector.
Coil Error
The coil is not 1
communicating with
the control box.
Coil Incompatible
1
The coil is
communicating with
the control box but
the detector is not
recognising it.
Overload
The detector has 1
received a signal that
is too strong for it
to interpret. This will
appear until there is no
more overload.
The menu scale
line icon will slowly
1
2
flash until the coil is
3
4
plugged back in.
5
AL
Turn the detector off
before connecting a
1
2
standard coil.
3
4
5
AL
Take the coil away
from the source of
1
2
overload.
3
4
5
AL
Once all errors are resolved the
detector will begin operation with a
blank detection screen.
The X-Terra Series are capable of operating
at different transmission frequencies set by
VFLEX compatible coils; Low (3kHz)*, Standard
(7.5kHz) and High (18.75kHz).
To view the type of coil:
Press Menu/Select to enter the
settings screen.
Press and hold Accept/Reject
to view
the coil identification screen.
Release Accept/Reject
to return
to settings.
Press Pinpoint/Detect
to return to
detection.
The X-Terra Series operate with
Concentric (c) and Double D (d) coils.
67

Coil identifiCation

Concentric
Standard
Frequency
Concentric
Low
Frequency
Concentric
High
Frequency
Double D
Standard
Frequency
Double D
Low
Frequency
Double D
High
Frequency