Chevrolet 2008 Corvette Owner's Manual page 37

For most basic types of child restraints, there are
many different models available. When purchasing a
child restraint, be sure it is designed to be used
in a motor vehicle. If it is, the restraint will have a
label saying that it meets federal motor vehicle
safety standards.
The restraint manufacturer's instructions that come
with the restraint state the weight and height
limitations for a particular child restraint. In addition,
there are many kinds of restraints available for
children with special needs.
CAUTION:
{
To reduce the risk of neck and head injury
during a crash, infants need complete support.
This is because an infant's neck is not fully
developed and its head weighs so much
compared with the rest of its body. In a crash,
an infant in a rear-facing child restraint settles
into the restraint, so the crash forces can be
distributed across the strongest part of an
infant's body, the back and shoulders. Infants
should always be secured in rear-facing child
restraints.
CAUTION:
{
A young child's hip bones are still so small
that the vehicle's regular safety belt may not
remain low on the hip bones, as it should.
Instead, it may settle up around the child's
abdomen. In a crash, the belt would apply
force on a body area that is unprotected by
any bony structure. This alone could cause
serious or fatal injuries. To reduce the risk of
serious or fatal injuries during a crash, young
children should always be secured in
appropriate child restraints.
1-33