Chevrolet 2008 Corvette Owner's Manual page 194

ABS (Antilock Brake System) ACTIVE
This message displays when the Antilock Brake System
(ABS) is adjusting brake pressure to help avoid a
braking skid.
Slippery road conditions may exist if this message is
displayed, so adjust your driving accordingly. The
message stays on for a few seconds after the system
stops adjusting brake pressure. See Antilock Brake
System (ABS) on page 4-5 for more information.
ACTIVE HANDLING
This message displays when the Active Handling
System is operating. The Active Handling System is a
computer controlled system that assists the driver
in controlling the vehicle in difficult driving conditions.
You may feel or hear the system working and see
the ACTIVE HANDLING message displayed in the DIC.
This message stays on for a few seconds following
the active handling event. This is normal when the
system is operating. See Active Handling System on
page 4-7 and Braking on page 4-4.
3-58
ACTIVE HANDLING CALIBRATING
This message displays and the active handling system
light on the instrument panel cluster turns on while the
system is calibrating after exceeding 19 mph (30 km/h)
for 10 seconds. See Active Handling System Light on
page 3-43. The Active Handling System is not functional
yet. The Active Handling System performance is affected
until the next message ACTIVE HANDLING READY is
displayed. The Active Handling System is off until the
ACTIVE HANDLING READY message is displayed.
See Active Handling System on page 4-7 for more
information.
ACTIVE HANDLING READY
This message displays when the functional check of
the Active Handling System has been completed.
See Active Handling System on page 4-7 for more
information.
ACTIVE HANDLING WARMING UP
This message may display when you first start your
vehicle during cold winter weather, and begin to
drive away, up to 6 mph (10 km/h). This is normal.