The Quickest Way To Start A Cd Is With The One Touch Operation; Loading Discs - JVC MX-D302T Instructions Manual

The Quickest Way to Start a CD Is with the One Touch
Operation —————————————————————————
Press the CD £ /8 button (or the £/8 button on the Remote Control).
For Normal Play (Play mode indicator is not lit):
•
•
For Continuous Play or Random Play in Display mode
(CONT. or RANDOM indicators are lit):
•
•
•
Press a DISC button (1 to 3).
•
•
Press the 0 button.
o
•

Loading Discs

1. Press the 0 button on the left of the Disc button you want to insert
the disc into.
The disc tray slides out automatically.
2. Place a CD, with its label side up, onto the tray.
ATTENTION: To avoid malfunctions when you play a CD, set the CD in the right place at
the center of the tray.
or
3. Press the 0 button to close the tray.
4. Repeat steps 1 to 3 to insert other discs into other trays.
•
o To put an 8 cm CD into a tray, insert it so that it is aligned with the groove in the tray's centre.
If a tray is open when the System switches to Standby mode, the tray is closed automatically.
If the CD cannot be read correctly (due to scratches etc.), "00 00000" appears on the display.
If there is a CD in the disc tray for the selected disc number, the power is automatically turned on
and the CD is played from the first track.
If there is no CD in the disc tray for the selected disc number, the power is automatically turned
on and "NO DISC" appears on the display. The CD Player is in stop mode.
If there is a CD in the disc tray for the selected disc number, the power is automatically turned on
and the CD is played continuously from the first track or the tracks are played in random order.
If there is no CD in the disc tray for the selected disc number, the power is automatically turned
on and other tray containing a CD is selected and is played continuously from the first track or the
tracks are played in random order.
If there are no CDs in CD player, the power is automatically turned on and "NO DISC" appears
on the display in Normal Play mode. The CD Player is in stop mode.
If there is a CD in the disc tray for the selected disc number, the power is automatically turned on
and playback starts from the selected CD.
If there are no CDs in CD Player, the power is automatically turned on and "NO DISC" appears
on the display in Normal Play mode. The CD Player is set to stop mode.
The power turns on, and the tray opens automatically.
CD
Tray
To continue putting discs into other trays, even if a tray is open, by pressing the 0 button of
another disc tray, the open tray will close automatically, and the new disc tray will slide out.
CORRECT INCORRECT
13