The Quickest Way To Start A Cd Is With The One Touch Operation; Basics Of Using The Cd Player - Continuous Play; To Insert Discs - JVC GVT0001-002A Instructions Manual

The CA-D622T's CD Player has an Automatic Changer with 3 disc trays. You can use Continuous,
Random, Program or Repeat Play for the discs in DISC-1, DISC-2 and DISC-3. Repeat Play can
repeat all the tracks on all the CD's, the tracks on one of the CD's or one track on one CD. There is
also the Tray Lock function, which safely keeps discs in the trays.
Here are the basic things you need to know to play a CD and locate the different selections on it.
Each selection is called a track, so when we are talking about locating a track, we are also talking
about how you find a certain song or performance.
The Quickest Way To Start a CD Is With the One Touch Operation ——————
The power comes on, and operations are done automatically.
Basics of Using the CD Player — Continuous Play
You can play the discs continuously in the DISC 1 to DISC 3 trays.
To Insert Discs ——————————————————————————
1.
2.
or
3.
4.
Note: When the CD Player is reading a disc, "- - - -" appears in the display. While this is being
displayed, the 0 button or DISC button cannot be used. Once the display changes from "- - - -" to
another display, the 0 button and DISC button can be used.
Press the CD or ‹/8 button (or the £ button on the Remote Control).
• If there is a CD in the disc tray of the selected (lit) disc number, playback continues from the
track where it was interrupted.
• If there is no CD in any of the disc trays, the message "OPEN" appears in the display after a
few seconds and the disc tray for the marked disc opens.
Press a DISC button (1 to 3).
• If there is a CD in the disc tray for the disc number you have selected, playback begins from
the first track of that disc. If there is no CD in the disc tray, the message "OPEN" appears in
the display after a few seconds and the disc tray opens.
Press the 0 button.
• The power turns on, and the tray opens automatically.
Press the 0 button on the left of the Disc button you want to insert the disc into.
The disc tray slides out automatically.
Place a CD, with its label side up, onto the tray.
ATTENTION: To avoid malfunctions when you play a CD, please set the CD in the right place at
the center of the tray.
CD
Tray
Press the 0 button to close the tray.
Repeat steps 1 to 3 to insert other discs into other trays.
To continue putting discs into other trays, even if a tray is open, by pressing the 0 button of
another disc tray, the open tray will close automatically, and the new disc tray will slide out.
To put an 8 cm CD into a tray, insert it so that it is aligned with the groove in the tray's center.
"OPEN" appears in the display when a tray opens, and "CLOSE" when a tray closes.
If a tray is open when the CA-D622T switches to Standby mode, the tray is closed automati-
cally.
CORRECT INCORRECT
15