Printing A Network Setup Page - Dell 5210n Quick Reference Manual

Printing a Network Setup Page

You can print a network setup page to review the default printer settings and to verify the printer options are installed
correctly.
1 Make sure the printer is on.
2 Press the Menu button
3 Press the Down arrow button
4 Press the Down arrow button
Page, and then press the Select button
The printer returns to Ready.
Common Printer Messages
Message
38 Memory Full
80 Scheduled maintenance
advised
88 Toner is low
Close Door or
Insert Cartridge
Enter PIN
Insert Tray <x>
Power Saver
Tray <x> Empty
Tray <x> Low
on the operator panel.
until appears next to Reports, and then press the Select button
until appears next to Network Setup Page or Network <x> Setup
.
Action
• Press the Select button
The job may not print correctly.
• Cancel the current job.
• Install additional printer memory. For more information, see the User's Guide.
• Press the Select button
• Replace the maintenance items and if necessary, reset the printer maintenance
counter. For more information, see the User's Guide.
• Replace the toner cartridge. For more information, see the User's Guide.
• Press the Select button
• Close the upper front door.
• Install the toner cartridge.
Enter the PIN you identified in the driver when you sent the confidential job to the
printer.
Insert the specified tray into the printer.
• Send a job to print.
• Press the Select button
and display the Ready message.
Load paper in the tray to clear the message.
Add paper to the tray to clear the message.
to clear the message and continue printing.
to clear the message, and continue printing.
to clear the message and continue printing.
to warm the printer to normal operating temperature
.