Product Layout
Control Panel Layout
Function Instructions
Press the "
•
Heating function setting: press the FUNCTION button once, and the LED display will
•
show [ P8 ] (as the default power setting is 1800W). The HEAT indicator will light up,
meaning the cooker is heating up. The power can be adjusted by pressing the "
"
" buttons to alter to the following values:
(1000W) – P5 (1200W) – P6 (1400W) – P7 (1600W)
Warming function setting: press the FUNCTION button again and the LED display will
•
show [
H6
] (as the default temperature is 240C). The WARM indicator will light up,
meaning the cooker is in the warming process. The temperature can be adjusted by
pressing the "
– H3 (140°C) – H4 (180°C) – H5 (220°C)
Timer function setting: on the state of HEAT or WARM, press the TIME button once to
•
enter the time setting which is used to set the time for the power to shut off. The LED
display will show [
1) Press "
set is 99 minutes. The "
the numbers, or can be pressed and released to advance one number at a time.
Note: If the time is not adjusted within 5 seconds, the timer setting function will be
finished.
2) Press the TIMER button to confirm the time. A confirmation tone will sound.
3) The unit will stop automatically when no button has been pressed within 2 hours.
" button to start the unit. The LED display will show [
" or "
" buttons to alter to the following values:
10
], as the default time is 10 minutes.
" or "
" within 5 seconds to set the timer. The maximum time you can
P1 (400W) – P2 (600W) – P3 (800W) – P4
or
or
H6
(240°C).
" and "
" buttons can be held down to scroll through
00
].
P8
(1800W).
H1 (60°C) – H2 (100°C)
" or