Specifications; Save This Manual; Safety Warnings And Precautions - Greyhound 66015 Set Up, Operating, And Servicing Instructions

Power Output
Displacement / Stroke
Ignition Type
Cooling System
Idling Carburetor Adjust
Valve clearance
Maximum Power Output
Maximum Torque
Distributor Timing
Bore and Stroke
Spark Plug Type
Gasoline Type
Gasoline Tank Capacity
Drive Shaft Type
Start Type
Speed
Oil Capacity and Type
Engine Mounting
Weight
Overall Dimensions
Recommended Applications
Features
The Emission Control System for this generator's engine is warranted for standards
set by the U.S. Environmental Protection Agency. For warranty information, refer to the back
two pages of this manual.
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.

sAfety wArnings And precAutiOns

wArning: When using this Engine, basic safety precautions should always be followed to reduce
the risk of personal injury and damage to equipment.
keep work area clean. Dark and cluttered areas invite injuries.
1.
2. Observe work area conditions. Do not use the Engine in damp or wet locations. Do
not expose to rain. Keep work area well lit. Do not use powered tools in the presence
of flammable gases or liquids.
SKU 66015

specificAtiOns

6.5 HP Gas Engine, EPA approved
196 cc; 4-stroke
Electronic ignition (T.C.I.)
Forced air cooling
1700 +/- 150 RPM
Cold engine – Intake: 0.15 +/- 0.02mm;
Exhaust: 0.20 +/- 0.02 mm
4.8 KW @ 3600 RPM
11-N.M./2500-RPM
Intake valve opening: BTDC 10 degrees;
Intake valve closing: ABDC 20 degrees
68 x 54 mm
BP6ES, BPR6ES (NGK), or NHSPLD F6TC; 0.7~0.8 mm clearance
Unleaded
0.93 gallon (3.5 liters)
Horizontal, ¾" straight, (3/16") keyed shaft with ball bearings. Direction:
counterclockwise (facing shaft); Length: 2-1/4"; Central thread: 5/16"-24
Recoil
3600 RPM
0.528 quart (0.5 liters); SAE 10W30 (in freezing weather use 5W30)
Square pattern, 4 holes; 8.0-1.25 mm threads
33.8 lbs.
12-3/4" L x 14" W x 10-1/4" H
To drive: pump, sprayer, tiller, chipper, shredder, log splitter
Low oil shutdown, automatic
Longer engine life with bearing supported shaft
Meets EPA certification (2008)
Fuel shutoff valve

save this Manual

read all instructions before using this tool!
for technical questions, please call 1-800-444-3353. Page 3