Download Print this page
Infinity INTERLUDE IL10 Owner's Manual
Hide thumbs Also See for INTERLUDE IL10:

Advertisement

Quick Links

I
S
S
NTERLUDE
PEAKER
YSTEMS
Owner's Guide
• IL10
• IL30
• IL40

Advertisement

loading

Summary of Contents for Infinity INTERLUDE IL10

  • Page 1 ™ NTERLUDE PEAKER YSTEMS Owner’s Guide • IL10 • IL30 • IL40...
  • Page 2 Final placement depends on room acoustics, availability of space and your listening preference (Figure 2). NOTE: An Infinity powered subwoofer will add impact and realism to both music and film soundtracks. Contact your local Infinity dealer for recommendations on subwoofer models for Couch your application.
  • Page 3: Installing Feet

    NSTALLING IL30 and IL40 Refer to Figure 3 as you perform the following steps: 1. Open each accessory pack and locate the following items: four feet (with spike/round ends), four locking nuts, four nylon domes and one wrench. 2. Lay each speaker on its side and locate the four threaded holes on the bottom.
  • Page 4 (i.e., +). NOTE: If desired, consult your local Infinity dealer about speaker wire and connection options. The speakers have coded terminals that accept a variety of wire connectors.The most common connection is shown in Figure 4.
  • Page 5 IRING The Interlude Series outer connection panel and internal dividing network are designed so that separate sets of speaker cables can be attached to the low-frequency transducer and midrange/high-frequency transducer portions of this dividing network.This is called bi-wiring. Bi-wiring can provide several sonic advantages and considerably more flexibility in power amplifier selection.
  • Page 6: Final Adjustments

    NOTE: You should hear balanced audio reproduction across the entire frequency spectrum. If not, check all wiring connections or consult the authorized Infinity dealer from whom you purchased the system for more help. The amount of bass you hear and the stereo-image quality will be affected by a number of different factors, including the room’s...
  • Page 7: Specifications

    EN 50081-1:1992 EN 50082-1:1992 Infinity continually strives to update and improve existing products, as well Steen Michaelsen as create new ones.The specifications and construction details in this and Infinity Systems A/S Birkerød.
  • Page 8 © 1999 Infinity Systems, Inc. 250 Crossways Park Drive, Woodbury, NY 11797 USA www.infinitysystems.com (800) 553-3332 (USA Only) Part No. 335755-001 Infinity is a registered trademark of Infinity Systems, Inc. Printed in USA 12/99...

This manual is also suitable for:

Interlude il30Interlude il40