STEP 3: PREPARE THE VENTING BLOWER
4. Reassemble the blower wire. See Figure 15.
5. Rotate the unit so that the exhaust ports face the rear of the cabinet. See Figure 16. When you insert blower
unit, blower wire must be like figure 16.
6. Place blower unit back into cabinet. Check that the exhaust ports face towards the rear of the cabinet. See
Figure 17.
7. Reattach the blower plate to cabinet so the exhaust ports and blower plate opening are aligned. Attach with
one blower unit mounting screw and then one blower plate mounting screw. See Figure 18.
ROOM-VENTED (Recirculating) INSTALLATION:
1. Remove one blower unit mounting screw and one blower
plate screw. Remove the blower plate from cabinet.
See Figure 19.
2. Carefully lift the blower unit out of the microwave oven.
3. Rotate blower unit 90˚ so the exhaust ports face the
front of the cabinet. See Figure 20.
4. Place blower unit back into microwave oven.
5. Reattach blower plate to microwave oven. Attach with the one blower
unit mounting screw and then the one blower plate mounting screw.
See Figure 21.
INSTALLATION
.ECKHA #
exhaust
ports
.ECKHA %
blower
unit
.ECKHA
.ECKHA $
blower unit
exhaust ports
.ECKHA &
blower unit
.ECKHA
- 16 -
blower
unit
exhaust
ports
blower plate
mounting screws
blower unit
mounting screws
blower plate
mounting screws
blower unit
mounting screws
.ECKHA '
blower plate
mounting screws
blower unit
mounting screws