Specifications - Pioneer CX-916 Service Manual

8.2 SPECIFICATIONS

- DEH-P9100R/EW
General
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ...................................... 10.0 A
Dimensions
(mounting size) ...... 178 (W) × 50 (H) × 157 (D) mm
(front face) .............. 188 (W) × 58 (H) × 20 (D) mm
Weight ...................................................................... 1.8 kg
Audio/DSP
Maximum power output ...................................... 45 W × 4
45 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for Subwoofer)
Continuous power output .................................... 27 W × 4
Load impedance ........ 4 Ω (4 – 8 Ω [2 Ω for 1 ch] allowable)
Preout maximum output
level/output impedance .......................... 4.0 V/100 Ω
Loudness contour
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)
Equalizer (13-Band Graphic Equalizer)
Frequency ................ 50/80/125/200/315/500/800 Hz
Equalization range .............................. ±12 dB (2 dB)
Auto Equalizer (Front & Rear & Subwoofer 13-Band Graphic)
Frequency ................ 50/80/125/200/315/500/800 Hz
Equalization range .................... +6 — –12 dB (2 dB)
Network
HPF
Frequency .................................... 50/80/125 Hz
Slope ................................................ –12 dB/oct.
Subwoofer
Frequency .................................... 50/80/125 Hz
Slope ................................................ –18 dB/oct.
Gain ........................................................ ±12 dB
Phase ........................................ Normal/Reverse
CD player
System .................................... Compact disc audio system
Usable discs .................................................. Compact disc
Signal format .................... Sampling frequency: 44.1 kHz
Frequency characteristics .............. 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ...... 110 dB (1 kHz) (IEC-A network)
Dynamic range ............................................ 94 dB (1 kHz)
Number of channels ............................................ 2 (stereo)
FM tuner
Frequency range ...................................... 87.5 – 108 MHz
Usable sensitivity .................................................... 11 dBf
(DIN45324, +B = 14.4 V)
50 dB quieting sensitivity ........................................ 16 dBf
Signal-to-noise ratio ...................... 70 dB (IEC-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
(volume: –30 dB) MW tuner
Frequency range ........................ 531 – 1,602 kHz (9 kHz)
Usable sensitivity .............................. 18 µV (S/N: 20 dB)
1.3/2/3.2/5/8/12.5 kHz
Selectivity .................................................. 50 dB (±9 kHz)
LW tuner
Frequency range ........................................ 153 – 281 kHz
1.3/2/3.2/5/8/12.5 kHz
Usable sensitivity .............................. 30 µV (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
Note:
• Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.
DEH-P9100R,P8100R
Number of quantization bits: 20; linear
(1.0 µV/75 Ω, mono, S/N: 30 dB)
(1.7 µV/75 Ω, mono)
105