Advertisement
Note: A plastic tab was attached to the toy for in-store demonstration purposes. While the
tab may have already been removed, check the back of the toy to be sure. If the plastic tab
is still attached, open the fasteners on the back of the toy and pull to remove the tab. Close
the fasteners and throw the plastic tab away.
For best performance, we recommend that you replace the batteries that came with this
toy with three, new "AA" (LR6) alkaline batteries.
• Open the fasteners on the back of the toy.
• Pull the sound box out of the toy to access the battery compartment.
• Loosen the screws in the battery compartment door. Remove the battery compartment
door and the exhausted batteries.
• Pull tether strap to remove batteries. Discard the batteries.
• Replace tether strap in bottom of battery compartment.
• Insert three "AA" (LR6) alkaline batteries. Make sure the bottom battery is inserted
on top of the tether strap.
• Replace the battery compartment door and tighten the screw.
• Fit the sound box back into the toy and close the fasteners.
• If the product begins to operate erratically you may need to reset the electronics.
Slide the power switch off and then back on.
• When sounds or lights become faint or stop, it's time for an adult to change the batteries!
• Protect the environment by not disposing of this product with household waste
(2002/96/EC). Check your local authority for recycling advice and facilities.
Battery Replacement
1,5V x 3
"AA" (LR6)
Advertisement
