Download Print this page

Battery Replacement; Battery Safety Information - Fisher-Price Y6966 Manual

Advertisement

Battery Replacement

For best performance, we recommend
replacing the batteries that came with
this toy with three, new "AA" (LR6)
alkaline batteries.
• Locate the battery compartment on the
bottom of the toy.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver and remove the door.
• Remove the exhausted batteries and
dispose of them properly.
• Insert three, new "AA" (LR6)
alkaline batteries.
• Replace the battery compartment door
and tighten the screws.
• If this toy begins to operate erratically
you may need to reset the electronics.
Slide the power/mode switch off and
then back on.
• When sounds or lights from this toy
become faint or stop, it's time for an
adult to change the batteries.

Battery Safety Information

In exceptional circumstances, batteries
may leak fluids that can cause a chemical
burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable
(nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods
of non-use. Always remove exhausted
batteries from the product. Dispose of
batteries safely. Do not dispose of this
product in a fire. The batteries inside
may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the product before charging.
• If removable, rechargeable batteries
are used, they are only to be charged
under adult supervision.
3
1,5V x 3
"AA" (LR6)

Advertisement

loading