Advertisement
Remote Control
Indicator LED (lights
Press
to arm YOYOCam.
Press
to disarm YOYOCam.
When the Emergency button
Master and each added Emergency number in turn until someone answers, at which point that person can hear the
audio from YOYOCam. YOYOCam tries each number up to three times before giving up. The LED indicator displays
ongoing voice call.
Note: If YOYOCam is set to call a landline, check that hanging up the landline clears the call; some telephone
networks do not clear the call when the called end hangs up, making it impossible to dial a new call. We
recommend that emergency calls are made to mobile numbers.
Alternatively, send #39#1# to YOYOCam to set SMS/MMS mode. When the Emergency button is pressed
YOYOCam acknowledges with a bleep, and sends an SMS alert followed by an MMS with an image to the
Master and each added Emergency number.
Note: YOYOCam responds to the Emergency button in both Armed and Unarmed states. If YOYOCam is busy,
for example sending images, the ongoing operation is cancelled in order to action the Emergency alarm.
Pairing your YOYOCam with a Remote Control
Before use, each remote must be paired with your YOYOCam. Up to five remotes can be paired; two are
supplied.
1. Press the SET button. YOYOCam bleeps and LED flashes orange
2. Press any button on the remote control. YOYOCam bleeps and LED turns green
returns to orange flashing
3. Press SET to exit pairing mode. In any case pairing mode times out after 15 seconds.
Disarm
YOYOCam
when any button
pressed to indicate
transmission
is pressed, YOYOCam acknowledges with a bleep. By default, YOYOCam calls the
ready to pair another remote control.
Cover slides
open & closed
Arm
YOYOCam
Emergency
button
indicating pairing mode.
for 2 seconds then
Advertisement
