Advertisement
Quick Links
QUICK START GUIDE
YOYOCam 3G Indoor
Model G33
GSM/3G Remote Surveillance Camera
www.yoyomotion.com
YOYOCam G33 Status Indicator
LED
Status
Searching for network / SIM PIN lock enabled
Alarm triggered
No SIM card / System error / charging (power switch off)
Arming (20seconds to armed state)
Armed
Disarmed / Waiting for Master to register
Sending messages / Ongoing voice call
Factory reset
Key
Fast flash (two flashes per second)
Slow flash (one flash per second)
Two second flash
Note:
Send #31#0# to disable status indicator LED, #31#1# to enable it (default).
Web Rev F
YOYOCam G33 Features
Insert a SIM card, perform a few simple configuration steps and YOYOCam is ready to guard
your property.
Easy control via SMS
or APP*
03
2
Temperature monitoring
+
Infrared body
detector
White LED lights
enable the camera
to capture images
in the dark
*Search for YOYOCam 3G Indoor on the App Store
Two quick flashes every 2 seconds
On
© Copyright, March 2015 YOYOMotion AB. All rights reserved.
GSM & 3G built in
Schedule image
sending and arming
+
_ _
!
Request image
any time
Dial YOYOCam
and listen in
SM
TM
or Google Play
Get to know YOYOCam G33
Power
switch
Temperature
sensor
Antenna
connector
Built in Stand
Un-clip the stand and rotate backwards.
Power outage
alert
Battery backup
(rechargable)
Alarm by SMS
(text)
Mounting Bracket
Alarm by MMS
with images
Alarm by Email
with images
Infrared body
detector
ON
OFF
GSM/3G antenna
Status indicator
White LED lights
Camera
Light Sensor
Microphone
Temperature
sensor socket
Mount/tripod
screw
Power cable
holes
Battery
compartment
cover
Fold-out
stand
ON
ON
OFF
OFF
Advertisement
Summary of Contents for YoYo cam G33
-
Page 1: Mounting Bracket
Get to know YOYOCam G33 Infrared body detector GSM/3G antenna Power switch QUICK START GUIDE YOYOCam 3G Indoor Status indicator Model G33 White LED lights GSM/3G Remote Surveillance Camera Camera Light Sensor www.yoyomotion.com Microphone YOYOCam G33 Status Indicator Temperature Status sensor Searching for network / SIM PIN lock enabled Alarm triggered... - Page 2 STEP 1. Prepare YOYOCam G33 STEP 2. Mount YOYOCam G33 1. To attach the antenna, align the plug with the antenna connector and screw it on gently by BUILT IN STAND hand until it is finger tight. Do not use tools. To remove it, gently unscrew the nut by hand. Un-clip the stand and rotate backwards.
-
Page 3: Factory Reset
YOYOCam G33 - Complete Command List LED LIGHTING SETTINGS off (never turned on) #20#0# Note: CAPITALS (eg. OFF) denote default setting AUTO mode (on when dark and motion detected) #20#1# ARM AND DISARM (Master & User) Always (on whenever motion detected, even in bright light) #20#2# Arm (active 20 seconds after command received) #01#... -
Page 4: Important Information
YOYOCam G33 Troubleshooting Guide Important Information The status indicator is off Please read this information before using your YOYOCam. The back-up battery is flat or not connected and there is no external power. S S a a f f e e t t y y a a n n d d U U s s a a g g e e G G u u i i d d e e l l i i n n e e s s •...