Advertisement
Download the User Guide & do more with YOYOCam G2
For more information, download the full user guide from www.yoyomotion.com/camera.html and you can also find
out how to:
•
Set an automatic arm/disarm schedule based on day and time.
•
Set YOYOCam to automatically take and send images according to a day and time schedule.
•
Add up to 15 remote sensors such as door magnets, smoke detectors etc.
•
Change advanced settings including image brightness, orientation, alarm notification method, MMS
parameters.
Factory Reset
If the Master phone is lost or you want to set up YOYOCam again from the beginning, you can use Factory Reset to
set all settings and parameters back to the factory default. Following Factory Reset you will need to re-pair the
remote controls and any remote sensors, re-enter any mobile network (MMS) settings and reconfigure all users etc.
To perform Factory Reset:
1.
Switch Off YOYOCam and wait at least 20 seconds.
2.
Press and hold the Reset key.
3.
Switch on YOYOCam while the Reset key is still pressed.
4.
After approx. 10 seconds, YOYOCam bleeps and the indicator LED goes green
5.
You may now release the Reset key.
and then flashes red
Advertisement
