Blue Yeti Owner's Manual page 9

From this screen, you will want to adjust the microphone monitoring volume.* If there is NOT a visible fader for micro-
phone output, select "Properties" from the Options menu. Make sure that the box labeled "Microphone," within the
"Show the following volume controls" window, is checked.
*NOTE: The microphone monitoring volume is different than the microphone gain control. The microphone monitoring volume is the
amount of sound from the microphone that is sent to your main computer output. The microphone input volume is the control that de-
termines the amount of sound from the microphone that goes into your computer. If the microphone input is distorting, the microphone
input volume should be adjusted accordingly.
From this screen, you will also want to adjust the computer's Master Volume. As a starting point, set the computer's
master volume to 100%. Once you've selected the Yeti as your output device, you can control headphone volume with
volume knob on the front of the Yeti.
6. Select "Yeti Stereo Microphone" from the "Sound Recording" pull down menu.
7. Select the "Volume" button within the "Sound Recording" area.
9