Getting to know your Yeti
Triple Capsule Array
any situation.
Multiple pattern selection
omnidirectional, bidirectional) by simply rotating the pattern selector knob. See pages 12-19 for more details and pat-
tern suggestions.
Microphone gain
• Use this knob to control the gain (sensitivity) of Yeti's microphone elements. Begin recording
with this knob centered. If you are experiencing digital distortion with a very loud sound source, simply decrease the
gain counterclockwise. If you desire higher sensitivity, simply increase the gain by turning clockwise.
Blue logo
• The Blue logo indicates the front of the microphone.
Set screws
• Turn each of these knobs clockwise to tighten and secure the microphone at the desired angle. To
remove the microphone from the included desk stand, simply unscrew both set screws entirely while supporting the
microphone with your hand. Carefully remove the Yeti microphone by lifting directly up and out of the desk stand.
• Three condenser capsules in an innovative configuration to enable great recordings in most
• You can quickly select from each of Yeti's four pattern settings (stereo, cardioid,
4